 |
Guangdong, China
Tingmay
M-366
Multi-Function Beauty Equipment, Multi-Function Beauty Equipment
CE
CE,PSE,ISO9001
electric hair follicle stimulator
45*34*26
7.5kg
110-220V
50-60Hz
95W
ultrasonic
Anti-wrinkle Machine, Facial Massager, galvanic microcurrent
High frequency ultrasonic galvanic facial machine remove dead skin
1.Tingmay factory
2.CE approval
3.electrotherapy
4.galvanic skin care
5, ODM/OEM
High-Frequency
Use special Ultraviolet rays intensity to treat the skin that sterilize the skin and accelerate wound healing.
To get rid of spots, pigmentation, pimples and acne.
Instruction Procedure:
Insert the Ozone electrode into the handle and keep touch well.
Connect the plug to the power outlet then turn on the machine.
Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.
After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.
Galvanic
1. Function:
1. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
2. Nourish skin and improve skin conditions
2. Instruction Procedures:
Put the negative iron bar into the hand of client.
Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal-bar, coinstantaneous spread proper Gal-out medicine water on the client’s face.
Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power, the machine is ready for Gal-out work.
It will take 4-6 minutes operating time.
The Gal-in operation is same as the Gal-out operation. (note: Gal-in operating should press the button to “-” mark.).
After over the operation, first turn off power then remove the G-al-bar from the client’s face
Volt. | Power | Hz. | Temp. | G.W. | Size |
110V/220V | 95W | 50/60Hz. | 5-40°c | 8kg | 45*41*26cm |
More pictures:
High frequency ultrasonic galvanic facial machine remove dead skin
1.Tingmay factory
2.CE approval
3.electrotherapy
4.galvanic skin care
5, ODM/OEM
High-Frequency
Use special Ultraviolet rays intensity to treat the skin that sterilize the skin and accelerate wound healing.
To get rid of spots, pigmentation, pimples and acne.
Instruction Procedure:
Insert the Ozone electrode into the handle and keep touch well.
Connect the plug to the power outlet then turn on the machine.
Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.
After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.
Galvanic
1. Function:
1. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
2. Nourish skin and improve skin conditions
2. Instruction Procedures:
Put the negative iron bar into the hand of client.
Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal-bar, coinstantaneous spread proper Gal-out medicine water on the client’s face.
Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power, the machine is ready for Gal-out work.
It will take 4-6 minutes operating time.
The Gal-in operation is same as the Gal-out operation. (note: Gal-in operating should press the button to “-” mark.).
After over the operation, first turn off power then remove the G-al-bar from the client’s face
Volt. | Power | Hz. | Temp. | G.W. | Size |
110V/220V | 95W | 50/60Hz. | 5-40°c | 8kg | 45*41*26cm |
More pictures:
