2016 hot sale 2 in1 micro crystal diamond dermabrasion machine/crystal dermabrasion machines
crystal and diamond dermabrasion
Skin auto clean
120# crystal powder,
Germany Becker Pump : Type : V.T 4.4
Inlet Capacity : 4.1/4.7
Max. Vacuum 150/150mbar
TaiWan Pump : Type : DV-3V
End Pressure : -680mm-hg
Max Capacity : 3.3 M3 /h 60Hz
3.0 M3 /h 50Hz
Vacuum Pressure : 60-70cmhg
Micro Dermabrasion unit provided a non-surgical skin refinish procedure, by using
sterile micro-crystals to abrade
or rub off the top skin layer, then Vacuuming out the particles along with any dirt
and dead skin back up. This procedure removes skin debris, imperfections, blemishes,
wrinkles and unwanted pigmentation on the skin.
The unit has a specail feature, which is the ability to vacuum back the remaining crystals
on the skin.
A lot of Microdermabrasion Machines have a same problem: Crystal clogging. During
operation, crystals suddenly stopped, they are jammed in handpiece and crystal bar.
Our Machine solved this problem in a simple and fast way.
it is a creative improvement of the Micro-crystal Dermabrasion. The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or
rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin
back up. This procedure removes skin debris,
imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage
of Diamond Dermabrasion,
accompany with skin products that penetrate through top skin layer that reach the dermis
level, helps to replenish natural nutrients, restore cell activity, and promote skin health.
The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin.
1. crystal flow and vacuum pressure are controlled separately, make it simple and
accurate to administer the peeling process and thus reduces any chance to cause
2.this new system has been improved so no jam occurred in the crystal flow system
and eradicated hence foot pedal is no longer required in this new model.
3.perfect design of the runningrod, with four holes, one releasing and the other
recycling the crystal power, so as to avoid blocking the pipe and prevent to much
powder remained on the surface.
4. A dehumidifier is attached to back of the equipment, it can avoid block caused by
damp of powder.