 |
vacuum/spray/high frequency/galvanic 4 IN 1 skin rejuvenation machine tm-264
1.factory supply
2.vacuum and spray
3.high frequency
4. galvanic
5.OEM/ODM
Function:
1. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
2. Nourish skin and improve skin conditions
Instruction Procedures:
1. Put the negative iron bar into the hand of client.
2. Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal- bar, coinstantaneous spread proper
Gal-out medicine water on the client’s face.
3. Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power,
the machine is ready for Gal-out work.4. It will take 4-6 minutes operating time.
5. The Gal-in operation is same as the Gal-out operation. (note: Gal- in operating should press
the button to “-” mark.).
6. After over the operation, first turn off power then remove the G-al-bar from the client’s face.
Caution:
1. Remove all the decorations on body before operation.
2. If used Gal-in/out medicine water has a mark to show its polarity, should obey to operate.
3. When operate face, keep the energy lever with 1 MA currency (light becomes green.).
4. In the operation, if the client has gently sting feeling, it is normal.
5. To the sensitive skin, redo Galin operation again with using distilled water to calm skin.6. After over the operation,
used electrodes should be cleaned and dry storage.
Specification
Model No. | Volt. | Power | Hz. | Temp. | Size | G.W. |
TM-264 | 110V-220V | 65W | 50/60Hz. | 5-40ºC | 45*34*26cm | 6.7kg |
Package:
vacuum/spray/high frequency/galvanic 4 IN 1 skin rejuvenation machine tm-264
1.factory supply
2.vacuum and spray
3.high frequency
4. galvanic
5.OEM/ODM
Function:
1. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
2. Nourish skin and improve skin conditions
Instruction Procedures:
1. Put the negative iron bar into the hand of client.
2. Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal- bar, coinstantaneous spread proper
Gal-out medicine water on the client’s face.
3. Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power,
the machine is ready for Gal-out work.4. It will take 4-6 minutes operating time.
5. The Gal-in operation is same as the Gal-out operation. (note: Gal- in operating should press
the button to “-” mark.).
6. After over the operation, first turn off power then remove the G-al-bar from the client’s face.
Caution:
1. Remove all the decorations on body before operation.
2. If used Gal-in/out medicine water has a mark to show its polarity, should obey to operate.
3. When operate face, keep the energy lever with 1 MA currency (light becomes green.).
4. In the operation, if the client has gently sting feeling, it is normal.
5. To the sensitive skin, redo Galin operation again with using distilled water to calm skin.6. After over the operation,
used electrodes should be cleaned and dry storage.
Specification
Model No. | Volt. | Power | Hz. | Temp. | Size | G.W. |
TM-264 | 110V-220V | 65W | 50/60Hz. | 5-40ºC | 45*34*26cm | 6.7kg |
Package:
