You are here: Home » Products » Multifunctional Machines » multifunction beauty machine » facial care cryo machine tm-272
Share to:

facial care cryo machine tm-272

  • Guangdong, China
  • t&m
  • tm-272
  • Multi-Function Beauty Equipment, Multi-Function Beauty Equipment,ultrasonic, spots remove ,galvanice,
  • light blue & white
  • AC110-240V
  • 50-60Hz
  • 95W
  • 8 in 1
  • skin care
  • standed carton
  • 8 accessories

7 in 1 multifunction facial machine/galvanic facial machine

1.Tingmay manufacturer;CE
2.Multifunction facial machine
3.7 in 1 face lift
4.Vacuum&spray,high frequency,iontophoresis



It was invented in the 80’s to the Beauty Business. It can cure a lot of skin problem and accelerate problematic skin healing. Easy to operate that pop welcome by the majority of the beauty professionals and it is also a great investment for them. It has 3 main functions:

Mechanism Aspect

It can soft the skin tissue, accelerate absorption of skin products, increase body metabolism and blood circulation, gently stimulate the nerve system and cells etc.

Heat Aspect

It can accelerate the body metabolism rate and blood circulation. Calm the nerve tissue and help get rid of pain.

Chemical Aspect

It can accelerate the skin metabolism rate. Balance the PH value of the skin tissue. Help skin absorb treatment products and intensify sterilization.

Beauty Instrument Specification:

  1. The electricity voltage is 1.00MHz, 1MHz (with timer)
  2. Operation time: 1-30 minutes (adjustable)
  3. The intensity has 10 volume. Green-3, Yellow-3, Red-4.
  4. Electricity Output rate: 0-10W, adjustable.
  5. Pulse rate is 4Hz.
  6. Electricity Input rate: 110V/220V (with adjustable On/Off) 50-60Hz.
  7. Electricity supply rate: equal or less than 40W.


  1. Function:

Use special Ultraviolet rays intensity to treat the skin that sterilize the skin and accelerate wound healing.

To get rid of spots, pigmentation, pimples and acne.

Instruction Procedure:

Insert the Ozone electrode into the handle and keep touch well.

Connect the plug to the power outlet then turn on the machine.

Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.

After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.

Vacuum & Spray

  1. Function:
  2. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
  3. To make the suction/spray medicine water to spray as mist to nourish and calm skin.

Instruction Procedure:

Connect small suction glass tube to the suction/spray hose, put the hose to the suction port of machine, press the small hole on the small glass tube, then machine is ready for suction operation.

Connect spray bottles to the suction/spray hose, put the hose to the spray port of machine, press the small hole on spray bottle then the machine is ready for spray like mist.

Remove Spot

  1. Function

Remove spot & tattoo

Instruction Procedure

Insert the pin into the handle.

Clean the treat area with alcohol then spread it with anesthetic 3 minutes.

Turn on the machine and ready for operation.

When operating, care the currency lever and adjust a proper energy lever to avoid hurt.

l Spot: special care to test and analysis spot’s conditions, some spots on the surface of skin but some spots in the deep under skin issue. If spot small, might remove it one time, if spot big and pigments deposits deep, should remove it 2-3 times. Don’t cut through and break the spot’s surface one time, should burn and remove with small frame way. To spot in the deep under skin, should spread proper cell cream on it before the wounded cure well 2~3 days, to avoid inflammation or skin hollow happen. When spread the cream, if the wounded inflame, don’t spread it.

l Caruncle: gently touch the end with pin and kill the caruncle cell, later about 6-7 days, the caruncle drops. If the caruncle is too big, should remove it several times and not finish it in one time to avoid the wounded covers bad.

l Tattoo: ordinary tattoo area is big, should choose #3 big bin and treat several times, remind not finish treatment. Otherwise, the wounded area is very easy to be inflamed, if happen, should take the sick to hospital to treat soon.


1. Function:

1. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.

2. Nourish skin and improve skin conditions

2. Instruction Procedures:

Put the negative iron bar into the hand of client.

Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal-bar, coinstantaneous spread proper Gal-out medicine water on the client’s face.

Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power, the machine is ready for Gal-out work.

It will take 4-6 minutes operating time.

The Gal-in operation is same as the Gal-out operation. (note: Gal-in operating should press the button to “-” mark.).

After over the operation, first turn off power then remove the G-al-bar from the client’s face

Beautify the Breasts

  1. Function

To exercise the breast to get the best conditions.


  1. To make sure the appropriate level on client’s body.
  2. If feeling uncomfortable, stop use and re-adjust the level.
  3. Turn off the level before power off.

3. Procedure

Put glass tube into the suction tube.

Spray treatment product into the soft tube to make it like steam.

Connect the breasts cup to the dark tube to the PATTER area. Set the volume to the fastest level and test it. Put the cup to the client’s breast to see whether it is acceptable. Test it after 5-10 minutes and ask the client whether she can accept the level, if yes, stay there for about 30 minutes and extend the time if necessary.













More pictures:

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

 Factory-direct Connectivity Solutions.
 High quality, Competitive Price.
 Custom-tailored solutions.
 Problem-solving approach.


Guangzhou Tingmay beauty equipment CO., LTD is engaged in designing and manufacturing beauty equipment more than 10 years . 




 (+86)-13924166578 / (+86)-15018765608
 (+86)- 020-36517974
 Floor 7, No. 13, Erheng Road, Huanjiao Industrial Zone, Shijing Town, Baiyun District, Guangzhou, Guangdong, China (Mainland),