You are here: Home » Blog » Introduction of Cryolipolysis Machine and Cryolipolysis Machine Wholesale

Introduction of Cryolipolysis Machine and Cryolipolysis Machine Wholesale

Views: 10     Author: Site Editor     Publish Time: 2021-03-11      Origin: Site

What is Cryolipolysis Machine 

In the world of noninvasive fat removal,Cryolipolysis Machine is more popular than ever.Also known as cryolipolysis, CoolSculpting is performed by dermatologists and cosmetic surgeons for people looking to get rid of stubborn fat cells on small areas of the body. These areas include the arms, chin, and abdomen.The process works by “freezing” fat cells via a vacuum applicator. It’s performed in your doctor’s office. Over the following weeks, the targeted fat cells will continue to break down.Because not everyone can afford CoolSculpting and it isn’t covered by insurance, some people have tried to copy the procedure at home using ice and other frozen products. This is definitely not recommended. Attempting CoolSculpting at home is not only ineffective, but also potentially dangerous.


Side effects of professional Cryolipolysis Machine 

While the risks of trying CoolSculpting at home are far greater than having the actual procedure done, this doesn’t mean that professional treatments are completely risk-free.

It’s possible to experience mild side effects during and after a CoolSculpting procedure, such as:

  • cold

  • numbness

  • minor pressure

  • pain

  • redness

  • swelling

  • tenderness

  • feelings of fullness

  • tingling sensations

  • Such side effects of CoolSculpting may temporarily worsen in the days following your treatment, but then they will subside within a few weeks. This is because your body’s fat cells are still shrinking long after the procedure is over.

It’s also possible to develop a condition called paradoxical adipose hyperplasia after having the procedure. Though rare, this condition causes fat cells to enlarge again months later.

Talk to your provider about all the possible risks of your treatment. You’re much safer under the care of a professional rather than trying CoolSculpting at home.

How much does Cryolipolysis Machine cost?

According to the American Society of Plastic Surgeons, the average cost of CoolSculpting in 2017 was $1,481 per session. The cost can slightly vary based on the area of skin being treated, with smaller areas costing a little bit less. Some providers charge between $650 and $800 per area.

Fees may also vary by provider. It’s good to know this information in advance, as CoolSculpting, like other aesthetic procedures, isn’t covered by medical insurance.

However, you shouldn’t let the cost of CoolSculpting scare you into trying it out on your own at home. Many providers offer payment plans, and financing may also be an option. The CoolSculpting company itself also sometimes offers discounts or mail-in rebates.

If you attempt CoolSculpting at home and injure yourself, you could end up spending more money on medical care than you would have spent on professional CoolSculpting treatments to begin with.

In China, there are a lot of excellent businesses engaged in body analyzer, especially in Guangzhou area, such as tingmay company, specializing in body Cryolipolysis Machine wholesale

Does Cryolipolysis Machine  really work

There has been a lot of buzz lately about freezing — and no, we don’t mean winter temperatures in Boston. Freezing fat, known medically as cryolipolysis, is one of the hottest trends in noninvasive body sculpting — that is, losing pockets of fat without needles, knives, or real downtime.

The basics of body fat

Let’s start with the basics. Not all fat is created equal. We have two distinct types of fat in our bodies: subcutaneous fat (the kind that may roll over the waistband of your pants) and visceral fat (the stuff that lines your organs and is associated with diabetes and heart disease).From here on out, when we refer to fat, we are talking about subcutaneous fat, as this is the type of fat that cryolipolysis targets. A recent study showed that the body’s ability to remove subcutaneous fat decreases with age, which means we are fighting an uphill battle with each birthday we celebrate.

From popsicles to freezing fat

Cryolipolysis — which literally translates into cold (cryo) fat (lipo) destruction (lysis) — was invented, in part, by observing what can happen when kids eat popsicles. No kidding here. The cofounders of this process were intrigued by something called “cold-induced fat necrosis” that was reported to occur after young children ate popsicles that were inadvertently left resting on the cheek for several minutes. Skin samples taken from pediatric patients like these showed inflammation in the fat, but normal overlying skin. Thus, it appeared that fat may be more sensitive to cold injury that other tissue types.Using this concept, a cooling device was tested on pigs in 2007 to see if fat cells could be selectively destroyed. The results were promising and predictable; there was about a 1/2 inch reduction in the pig’s fat layer, without damaging the overlying skin, in the treated areas. By 2010, the first cryolipolysis technology approved for human use, named CoolSculpting, was cleared as a treatment for love handles. Clearance for treating other parts of the body, including the thighs, belly, bra fat, back, underside of the buttocks, and chin soon followed.

How does cryolipolysis work? No one knows for sure, but we think that a few days after treatment, the cooled fat cells die. Over the next several months, macrophages, part of the immune system’s clean-up crew, digest the dead fat cells.

A cool procedure

To date, there have been more than eight million CoolSculpting treatments performed worldwide. Unlike liposuction, which can require anesthesia and comes with risks of bleeding or serious infection, CoolSculpting is a relatively safe in-office procedure, with minimal pain and no downtime.

The treatment itself takes 35 minutes per application, and multiple applications may be needed to cover an area. For instance, four or more applications may be needed to ensure even fat removal from the entire front of the belly.

The most common side effects of treatment include redness, bruising, swelling, tingling, numbness, or darkening of the treated area. Most of these side effects, if present, will resolve within several months after treatment. Perhaps the most significant, albeit relatively rare, side effect of cryolipolysis is, paradoxically, increased fat growth at the treatment site. The exact incidence of this side effect is unknown; however, it appears to occur less than 1% of the time.

Results can be seen as soon as three weeks, with maximum benefit seen at approximately three months. Average reduction in fat ranges from about 10% to 25% per round of treatment, and there is no evidence of any body-wide side effects. A second round of treatment may be needed after several months, depending on the desired results.

Who’s a good candidate for fat freezing?

Cryolipolysis appears to be a safe and effective treatment for fat loss without the downtime of liposuction or surgery. But it is important to note that cryolipolysis is intended for fat loss, not weight loss. The ideal candidate is already close to their ideal body weight, but has stubborn, pinchable areas of fat that are difficult to get rid of with diet and exercise alone. Cryolipolysis also doesn’t target visceral fat, so it won’t improve your overall health. But it may help you fit into your favorite pair of skinny jeans.

Do home Cryolipolysis machines work

No. However, it’s easy to see why DIYers might think they would. The whole concept behind  Cryolipolysis Machine  started when Harvard scientists noted the effect eating popsicles had on some children’s cheeks. So, if eating popsicles had an effect on fat cells in cheeks, then surely applying that idea to other areas isn’t all that crazy. But there is more to freezing fat away… a lot more, so don’t go to bed with ice packs on your stomach tonight or buy a “CoolSculpting” device off Amazon or eBay.

 Cryolipolysis Machine is a procedure that does freeze fat cells, but the device is designed to do so without harming other skin cells. First, a gel pad is applied to the treatment area, which protects your skin cells from freezing. The gel pad is like a protective layer, similar to wearing gloves in freezing winter temperatures. Exposed skin to freezing results in frostbite, and can result in the skin dying. You’ve probably heard of extreme cases in which people’s toes and fingers were amputated due to frostbite. Same concept applies here. The CoolSculpting device placed over the gel pad carefully lowers the temperature of fat tissues underneath the skin.

At-Home Attempts at “CoolSculpting” are Painful and Dangerous

The CoolSculpting device works with the system to regulate temperature throughout the entire procedure. In fact, fat cells are not really “frozen” as the “freeze fat away” slogan suggests, but merely taken down to 39 to 41 degrees, the point at which fat cells die. The CoolSculpting system does not reach a low enough temperature to harm your skin, but that cannot be guaranteed by using ice packs directly on your skin or non-FDA approved CoolSculpting knock-offs. Not only would attempting to do this at home hurt, but also, it’s dangerous. The harm that would be done to your external skin layer, nerves and muscle tissue trying to get fat cells to the temperature at which they are destroyed could be irreversible.

At-home CoolSculpting devices do not work, and should not be attempted, because there is skill and technique involved with performing the procedure. Fremont Laser & Skin Care professionals undergo hours of training, are licensed, and perform the procedure on clients multiple times a day. In-office CoolSculpting is performed under the supervision of a physician to ensure clients’ safety and satisfaction with end results. This is something you cannot be guaranteed when attempting to DIY CoolSculpting at home.

Last, but not least, CoolSculpting by Zeltiq is the ONLY FDA-approved technique for Cryolipolysis (the medical term for freezing and destroying fat cells). It is available for sale only to trained medical professionals for use in their offices or clinics. Any at-home “coolsculpting” device or system is not the same you’ll find in med spas like Fremont Laser & Skin Care. Using any of these non-Zeltiq devices will result in disappointment in results at best, and scarring, burns and blisters at worst.

The bottom line

The more some people learn about CoolSculpting, the more tempting it is for them to try to freeze away fat cells at home. This is a very dangerous practice that could pose severe health consequences.

It’s always best to see an experienced CoolSculpting provider for your treatment. Only they have the equipment and training to perform the procedure safely.

While professional CoolSculpting may have mild side effects, this is nothing compared to the serious risks that DIY procedures may pose.

If you want to know if CoolSculpting is right for you, see a dermatologist or cosmetic surgeon for a free consultation. It’s also important to note that the procedure isn’t a substitute for healthy lifestyle habits. CoolSculpting only gets rid of targeted areas of fat that haven’t responded to diet and exercise.


Guangzhou Tingmay beauty equipment CO., LTD is engaged in designing and manufacturing beauty equipment more than 10 years . 




 (+86)-13924166578 / (+86)-15018765608
 (+86)- 020-36517974
 Floor 7, No. 13, Erheng Road, Huanjiao Industrial Zone, Shijing Town, Baiyun District, Guangzhou, Guangdong, China (Mainland),