Introduce Of HIFU Machine

Hifu ultrasound machine is a non-invasive therapeutic technique and a latest concept of skin tightening, non-surgical treatment. HIFU wave penetrates deep into 3.0mm ~ 4.5mm beneath skin and rise the temperature 55℃~ 60℃,within 0.5sec ~ 1sec, applying on the SMAS and the dermis, which make the collagen refresh and reconstituted. As a result, with the wrinkles removed and fascia lifted, a young beauty is being reborn!   The HIFU is divided into 3D HUFI, traditional HIFU and vaginal HIFU.   

The traditional HIFU which is able to be applied 1 line.3D HIFU can use to be applied 1 to 11 lines, made the maximum width of treatment area 10mm, adjusted the length ranged from 1mm to 25mm, selected energy range from 0.1J to 2.0J, depending on the specific individual.   

The Vaginal HIFU uses an noninvasive ultrasonic focusing technique to focus on the mucous membrane fibrous layer and muscle layer directly. Using ultrasonic waves as the energy source and taking advantage of its penetration and focus, the system will send out ultrasonic energy focusing in the the lamina and muscle fiber layer in a predetermined depth. A higher intensity of ultrasonic region, called focus region, is formed. In 0.1 second, the temperature of the region can reach to above 65 ℃ , so the collagen is reorganized and the normal tissue outside the focal region is undamaged. Therefore, the desired depth layer can obtain the ideal    effect of collagen concentration, reorganization and regeneration. Ultimately, the mysterious effect of vagina tightening is achieved.




Principle Of HIFU Machine

Ultrasonic high-energy focused ultrasound is traditionally used in medical treatment and belongs to "non-invasive" treatment. The energy source is ultrasound. Similar to the principle that solar energy focuses sunlight to produce huge energy at the focus, this technology focuses low-energy ultrasound in vitro on the SMAS layer in the body, and produces biological effects such as instantaneous high temperature (above 70°C), cavitation, mechanical action, etc. in the SMAS, reaching the fascia Ascending, the dermal layer will produce a lot of collagen during this stimulation process, which will enrich the skin and make the skin full. The principle of the ultrasonic knife is actually a process of first repairing and then repairing, so in order to avoid the damage after the ultrasonic knife , Three months after the ultrasonic scalpel, by taking 90 days of oral cortex repairing agent in Xinjiyin, quickly penetrate into the dermal layer to heal the wound, prevent cell proliferation and mutation at the wound, prevent scars, super repair damaged cell tissue, long-term use can be Provides a gentle environment for skin cells to achieve the most complete repair effect, which can effectively avoid facial redness, dry skin, pigmentation, unevenness, subcutaneous nerves, permanent skin collapse, stiffness, and short effective time after ultrasonic knife , Hyperplasia and other symptoms.


Matters Need Attention

1. Wash the skin of the physiotherapy site before using the instrument to prevent dirt from entering the skin with ultrasound or to prevent the penetration of ultrasound.

2. It is best to use a medium with a certain viscosity, which is conducive to the fusion of ultrasonic waves and skin, and prevents reflections caused by voids and adverse absorption of sound energy.

3. Each physiotherapy section is generally 15 to 20 minutes. Excessively long or improper use will overstrain the skin and cause poor absorption. The user can choose the appropriate time according to the size of the physical therapy site.

4. The degree of probe heat does not represent the output of the ultrasonic power; the small concentration of water or drugs should not be directly penetrated, otherwise it will easily cause dry skin.

5. When using the instrument, the probe should not be close to the eye, can't pass the eyeball, and pregnant women and severe heart patients are prohibited.

6. Water, oil and other media must not penetrate the inside of the instrument, and can not be hit, hit or dropped to avoid damage to the instrument.

7. After using the ultrasonic beauty instrument, please clean the probe in time and disconnect the power supply.

8. One year after the operation, the cortical repairing agent of Xinjiyin should be taken orally once or twice a day strictly according to the doctor's instructions, and gradually reduced to one according to the recovery situation;

Maintenance Of HIFI Machine

1.Use the machine in strict accordance with the instructions in the manual.

2. Make sure a plug with a grounding pin used before use and the power socket of the machine must be grounded.

3. The machine voltage is well-matched. If the local power supply voltage is unstable, we recommend that the user increase the power matching power supply.

4. Please use the designated accessories provided or recommended by the original manufacturer in order to make sure the machine's treatment effect and normal service life.

5.Prohibited by external shocks, so as to avoid damage, especially when using the handle, beware of falling down.

6. Don’t place the machine in the wet or near the water source, do not expose the machine directly to the sun.

7. Don’t let the machine close to a strong heat source, as this may affect the life of the machine and normal use.

8.Prohibited by external shocks, so as to avoid damage, especially when using the handle, beware of falling down.

9.Don’t allow children touch the machine; 

10. Please remove all metal objects from your body first to avoid unpredictable conditions and affect the efficacy.

11. Please pay attention to the skin touched should have a certain degree of wetness in order to avoid poor contact.

12. Don’t use the machine continuously for a long time, it will cause damage. Turn off the power switch of the machine when the machine is not in use, and make sure that the total power of the machine is turned off to ensure the safety of the electrical products.

Guangzhou Tingmay beauty equipment CO., LTD is engaged in designing and manufacturing beauty equipment more than 10 years . 




 (+86)-13924166578 / (+86)-15018765608
 (+86)- 020-36517974
 Floor 7, No. 13, Erheng Road, Huanjiao Industrial Zone, Shijing Town, Baiyun District, Guangzhou, Guangdong, China (Mainland),