spot removal machine acne remover tm-253

Function for the galvanic facial massager price machine

1. Soften blood vein and even out red face.

2. Rid pimples and acne (every ten days is served as a course)

3. Rid skin pigmentation. Use with high unit Vitamin C skin products to accelerate skin rejuvenation process. Expect to see result after 3 treatments with optimum result after 10-40 treatments.

4. Prevent and rid the formation of wrinkles, soften blood vein and face-lift. Due to the increase of body metabolism rate, it helps rid the said problem on a day-by-day basis.

5. Rid eye bags and dark circles. Message the delicate eye areas to rid excess water, puffiness and dark circles.

6. To soften skin tissue by message. Make it look and behave delicate and soft.

7. Accelerate the process of any skin treatments and achieve optimum results.

Operation:

1. Before operation, first clean face well with clean facial cream.

2. Wash off the cream then steam face 10 minutes.

3. Clear over the comedo on the face.

4. Spread shrink water on the face and tap it gently then wipe off it.

5. Test skin conditions then spread the suitable medicine cream on the face.

6. Turn on the machine then adjust the power of probe to fit skin well.

7. Set timer to show 15 minutes the normal work time.

8. Press the button to choose type of wave shape out.

9. Massage on skin covered medicine cream with probe.

10. After over the operation, turn off the machine and clean the dirty probe.

11. If use the machine coming with the Chinese traditional medicine mask powder,

it will have better effect.

Caution

1. Electricity is 220V/110V

2. First clean face (or wounded area) before operation.

3. The medicine cream used should be mucous to be absorbed in better by skins,

at the same to avoid burning the probe.

4. Work time set to 15 minutes and it is enough at the normal conditions.

5. Don’t make the probe to be near eyes or touch eyes to avoid hurt.

6. Don’t make the probe in work but not operate to touch skin, for to do that

is easy to burn the probe for over heat.

Beauty Instrument Specification:

1. The electricity voltage is 1.00MHz, 1MHz (with timer)

2. Operation time: 1-30 minutes (adjustable)

3. The intensity has 10 volume. Green-3, Yellow-3, Red-4.

4. Electricity Output rate: 0-10W, adjustable.

5. Pulse rate is 4Hz.

6. Electricity Input rate: 110V/60Hz.

7. Electricity supply rate: equal or less than 40W.

Function of Galvanic

• To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
• Nourish skin and improve skin conditions

Instruction Procedures of Galvanic

♦Put the negative iron bar into the hand of client.

♦Dip proper Gal-out medicine water with a small blade make-up cotton and stick to

the roll gear of the Gal-bar, coinstantaneous spread proper Gal-out medicine water

on the client’s face.

♦ Place the Gal-bar on the client’s forehead, press the button to “+” mark

and turn on power, the machine is ready for Gal-out work.

♦It will take 4-6 minutes operating time.

♦ The Gal-in operation is same as the Gal-out operation. (note: Gal-in

operating should press the button to “-” mark.).

♦After over the operation, first turn off power then remove the G-al-bar from the client’s face

Ultrasonic for facial skin care